A simple care routine starts with the material
The Jackits Stroker Pad is made from body-safe SEBS, an ultra-soft and foldable material that is textured for pleasure. Because it is reusable, a little routine after each session keeps the surface clean and the pad ready for the next one. The catalog describes it as easy to clean, so the main job is to be thorough with the textured areas and to let it dry completely before storage.
SEBS is not silicone, so treat the pad as its own material rather than assuming silicone-specific rules apply. The supplied information does not include a manufacturer cleaning procedure, so use the general steps below as a practical framework and follow any instructions that come with your pad.
What the catalog confirms about the Jackits Stroker Pad
- Screaming O Jackits® Stroker Pad: Made from body-safe SEBS material Material matters for cleaning: SEBS is soft and foldable, so clean gently and avoid anything that could degrade the surface.

Screaming O Jackits® Stroker Pad - Screaming O Jackits® Stroker Pad: Ultra-soft and foldable The pad can be opened out or folded, which helps you reach the textured areas during cleaning and drying.
- Screaming O Jackits® Stroker Pad: Textured for your pleasure Texture holds residue more than a smooth surface, so pay extra attention to the grooves when you clean.
- Screaming O Jackits® Stroker Pad: No slip grip The grip surface is part of how the pad stays controlled in use; clean it without abrasive scrubbing so it keeps that quality.
- Screaming O Jackits® Stroker Pad: Easy to clean The catalog supports a straightforward cleaning routine rather than a complicated one.
How to clean the Jackits Stroker Pad after use
These steps are a general care framework for a foldable SEBS stroker pad. The supplied record does not list a specific cleaner, water temperature or soak time, so keep the process simple and gentle.
- Unfold the pad: Open the pad out so you can see the textured surface and the grip side. This makes it easier to clean evenly.
- Rinse or wipe away residue: Use lukewarm water and a mild, toy-friendly cleaner or a small amount of gentle soap. Work over the textured areas with your fingers or a soft cloth.
- Clean the grip side too: The no-slip grip is part of the pad, so wipe it down as well. Avoid abrasive sponges or harsh scrubbing that could roughen the surface.
- Rinse thoroughly: Remove all cleaner residue with clean water. Leftover soap can leave a film and affect how the pad feels next time.
- Shake off excess water: Give the pad a gentle shake and press it between a clean, lint-free towel to remove surface moisture.
Drying: the step that protects the texture
Because the Jackits Stroker Pad is foldable, it can trap moisture in the folds and texture if you put it away damp. After shaking off excess water, leave the pad unfolded in a clean, dry spot with good airflow until it is completely dry. A drying rack or a clean towel works well; avoid direct sunlight or high heat, which can stress soft materials.
The supplied information does not give a specific drying time, so check by touch. The pad should feel dry across the texture and along any folds before you store it. If you are in a hurry, a fan on a low setting can help move air around the pad without heating it.
Storage tips for a reusable stroker pad
The catalog does not include a storage container or pouch with the Jackits Stroker Pad, so use what you have. The goal is to keep the pad clean, dry and free from pressure that could crease the soft SEBS.
- Store it fully dry and unfolded: Folding a damp pad can trap moisture. Once dry, you can fold it if space is tight, but avoid compressing it under heavy items.
- Keep it away from dust and lint: A clean zip pouch, a small storage box or a dedicated drawer keeps the textured surface free of debris between uses.
- Separate it from other toys: Soft SEBS can pick up marks or pressure creases if it is crammed against harder items. Give it its own space.
- Avoid extreme heat: Do not leave the pad on a radiator, in a hot car or in direct sun for long periods. Cool, dry storage is best for soft materials.
Reuse: what to check before your next session
Before you use the Jackits Stroker Pad again, give it a quick look and feel. The surface should be clean, dry and free from grit or lint. Check the texture and the grip area for any tackiness, tears or changes that were not there before. If something feels off, set the pad aside rather than using it.
The catalog says the pad can be used with any lubricant, so you can pair it with the lube you already prefer. Apply lube to the pad and yourself as needed, and clean the pad after use following the routine above. Because the record does not specify a lifespan or a maximum number of uses, replace the pad if the material shows signs of wear that affect comfort or cleaning.
What the supplied information does not cover
The Jackits Stroker Pad record confirms the material, texture, foldability, grip and ease of cleaning, but it does not include a manufacturer cleaning solution, drying time, storage pouch or detailed safety instructions. That means the routine above is a sensible general approach, not a set of official steps. If your pad came with a leaflet, follow that first. And if you are unsure whether a cleaner is suitable for SEBS, test a small area or stick to mild soap and water.


